Topless Asset Racing Program

I’ll paste below the cleaned-up hood design and the door panels. Lemme know what you think.

The graphic will be cut out around the outside of the girl and the meatball. If you click on her, you should get a better view; I was able to get rid of a lot of the pixelation of the original, but you won’t really see how it looks until the printer prints the final vinyl version for the car. I’ve got both .ai and .eps files ready to send but we’ll need to ftp them as they are big (21Mb). I’ve got this one set to print at about 45″ wide and 28″ tall, which will take up most of the hood of the car.

Here are the door panel graphics. The white parts will be cut out so that the light will shine through those parts at night. The first one is the driver’s door, the second is the passenger door. These can be done in any non-white color of solid vinyl that you want them to be made of, I chose red for now just because it’s pretty high contrast with the white.

Here’s the passenger door:

We need to measure how much of the lightbox is visible now that they have been installed. These graphics are based on the 14×20 original area that I designed when I built the lightboxes, but if the cut out area on the door is smaller than that then these will need to be re-worked. Let me know if you want any changes or anything else on these; I think we need to keep the door graphics pretty simple, since backlit graphics can get overwhelmed pretty easily.

Let me know what you want me to do about the t-shirt fronts.